SFC-6000

Ultra Fine Filter & Tube-in-Tube Cooler

  • PFA Body and PTFE filter membrane suitable for corrosive sample condition
  • Guard filter for analyzer inlet protection

TIT-6000 Tube-in-tube cooler

  • Flows from 1 L/hr to 340 L/h (Depends on Gas or Liquid Sample)
  • Variety materials choice (316SS, Hastelloy C, Alloy 400, Titanium, etc.) for your application
  • High pressure and temperature rating

Kinetics Product

SFC-6000 in-line gas filters are designed to remove particles from inert or corrosive gases for flow rates up to 30 SLPM. SFC-6000 filters provide efficient, low-cost point-of-use and 0.003 μm filtration capability of inert gases.

TIT-6000 Tube-in-tube cooler:
TIT-6000 tube-in-tube sample water coolers can be used specifically in high pressure sample in combination with high pressure cooling fluid. Liquid and gas analyzers need samples in a suitable temperature range for analysis and sometimes tube-in-tube water cooler could be your simple but effective solution for sample conditioning. For corrosion resistance application, material could be chosen other than 316SS, like Hastelloy C-22 or C276, Alloy 400, Titanium, etc.
Please consult us for your application.

Technical Specification

Model SFC-6000
Shell material  PFA
Filter membrane PTFE
Filtration perfor­mance > 99.9999999 % removal of all particles greater than 0.003 μm diameter (verified at the most penetrating particle size) 
Recommended max. flow rate for best performance  30 SLPM
Connections  1/4” OD Compression fitting
Dimension Length 71.5 mm; Diameter 21.5 mm  
Max. operation pressure  4.1 barG@20 ℃
Max. differential pressure  3.4 barG@20 ℃
Max. reverse differential Pressure  3 barG@20 ℃
Max. operation temperature  50 ℃
TIT-6000 Tube-in-tube cooler
Model TIT-6000
Material  316SS、Alloy 400、Hastelloy C276 
Pressure rating  340 bar 
Temperature rating  550 ℃
Outer tube size  1/2" OD or 12 MM
Inner tube size  1/4" OD or 6 MM 
Tube/coils length  4 M or 6 M
Sample & coolant connection  Swagelok Double Ferrule Connector